在此拆机指南中的精选工具

简介

The only tools needed are a philips screwdriver and a narrow putty knife.

这个拆解是不是维修指南。 要维修你的的Belkin Express Dock,请使用我们的服务手册

  1. View of the connectors
    • View of the connectors

    添加评论

  2. Use a putty knife to remove the four rubber feet.  Once removed, there are 4 phillips screws to be removed.
    • Use a putty knife to remove the four rubber feet. Once removed, there are 4 phillips screws to be removed.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • The next step is to use the putty knife to pry off one of the two plastic endcaps, they snap out and the circuit board slides out.

    添加评论

    • Use the phillips screwdriver to remove 5 more screws to remove the plastic mounting frame.

    添加评论

    • Front and back of the board.

    • From left to right on the front of the board the major chips are: LSI FW643E-02 (FIreWire800); Broadcom BCM57762 (gige); Intel L150I56 (Thunderbolt controller), NXP LPC1114F (two), Fresco FL1100 (USB3); C-Media CM119A (Audio)

    • From left to right on the back of the board the major chips are: Parade PS161HDM; Parade PS8301 (two); NXP ZSD310 (two); Parade PS8321. The chips seem to support HDMI/DVI conversion and Display Port!

    添加评论

    • close-ups of the major chips

    添加评论

thompsonfamily

于2011年01月21日注册

217 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 7

过去的30天: 34

总计 3,856