跳转到主内容
« 返回到所有故事

I Cured My Case of Mono

Gordon Krupsky -

iPod Classic

故事图片

iPod Classic Headphone Jack & Hold Switch Replacement

3小时

Difficult

我的问题

About a year ago, my left channel went almost dead. It was there, but so faint that you couldn't really hear it. I don't listen to my iPod through headphones too much, but I do use an FM transmitter in my car that gets audio via the headphone jack. In the car, instead of just having a dead left channel, I was stuck with a loud, high-pitched whine that would--sort of humorously--change pitch with my acceleration. It made listening to my iPod pretty much unbearable.

我的修理方法

I started this around 11PM and finished up around 2:30AM. Once I realized that I just needed to stay the course and pry the iPod open with brute force, it went alright. Seriously, cracking this baby open was not easy. I will say that after this, the rest of the process is a breeze. If I were doing this again, I'd probably skip out on those plastic opening tools. The metal spudger+putty knife is the real dream team that gets things moving.

我的建议

Stay the course. Skip the plastic opening tools. Fear not.

Also, grab a really small pair of needle nose pliers (mine were 4.5" long). Those are super handy for helping to move some of the smaller parts and also for working with those gnat-sized screws around the headphone/hold assemblies.

And, as an FYI, while the guide specifies using a Phillips 00, I found a Phillips 000 to work just as well.

Metal Spudger张图片
Metal Spudger

$2.99

« 返回到所有故事

2条评论

Naw dude - first of all, almost all fm transmitters do that high-pitched whine $@$*. Second of all, just go to your neighborhood auto parts store and get one of those feeler gauges (I got the kind that were bent at an angle). Then jam those bad boys down into the case where the clips are and VIOLA...

Jon Karr - 回复

I like your chosen title! (How have I not heard this joke before?) Good job.

unsubstantiated - 回复

添加评论