跳转到主内容
« 返回到所有故事

Open/Close Sensor embedded in the I/O board.

fbigelow -

MacBook Air 13" Mid 2012

故事图片

MacBook Air 13" Mid 2012 I/O Board Replacement

30分钟 - 1小时

Moderate

我的问题

Dropped my mid-2012 MacBook Air 13" (A1466) with headphones plugged in. Since then, opening and closing the lid had no effect on whether or not the laptop would go to sleep. After reading two different articles on ifixit.com, I felt fairly comfortable that replacing the I/O card would rectify the problem.

我的修理方法

I had already taken the MacBook apart four different times trying to diagnose the problem originally, so the step-by-step guides really weren't necessary for me, but I read them anyway and the high quality pictures and level of detail stepping you through the repair went way beyond any factory service manual. If you can find your exact device on this website, you can be assured you'll get no easier instructions elsewhere. This site is unique in that, most important, way. I've assembled IKEA furniture that was more difficult than this repair.

我的建议

Follow the instructions. They didn't miss anything. Be careful! Keep a little tray nearby to hold the screws and small parts, and if you have any parts left over, go back and do it again. While this isn't true with many other laptops, Apple put every single screw on a MacBook in there for a reason. They all need to go back where they belong. Have fun!

MacBook Air 13" (Mid 2012) I/O Board图片
MacBook Air 13" (Mid 2012) I/O Board

$89.99

« 返回到所有故事

0条评论

添加评论