iPod touch (Gen 2) Replacement Battery

  • iPod touch (Gen 2) Replacement Battery / Fix Kit
  • iPod touch (Gen 2) Replacement Battery / Part Only
  • 360°
360
iPod touch (Gen 2) Replacement Battery

$15.99

$15.99

当产品有货时,我们将给你发送消息。

产品详细说明

描述

描述

Replace a dead or damaged battery for your second generation iPod touch with this part.

套装内容

套装内容

  • New 800 mAh Replacement Battery
  • Small Phillips #00 Screwdriver
  • Plastic Opening Tool
  • Spudger

备注

Lithium ion battery shipping regulations limit the shipping methods for orders containing batteries. Domestic orders may only be shipped via Standard shipping. iFixit is not able to ship batteries internationally or outside the contiguous US at this time. iFixit Customer Support will contact you if your order needs to be modified after it is placed.

免责声明

Installation requires soldering of battery to logic board and will require the following additional tools: Soldering Iron, Solder, Tweezers

警告

Lithium-ion batteries pose a fire hazard if they begin to swell due to age or defect. Learn more about how to safely handle a battery that may be swollen.

兼容性

维修的故事

我的问题

Wife's 32G IPod Gen 2 died...dead battery. Earlier, I'd used an IFIXIT kit to replace a battery in a IPhone 4 and decided to tackle another Apple product.

我的修理方法

Repair went perfectly. The hardest step was the initial removing of the screen from the case. (I did find that very careful use of an Xacto knife . . .

我的问题

Wife's 32G IPod Gen 2 died...dead battery. Earlier, I'd used an IFIXIT kit to replace a battery in a IPhone 4 and decided to tackle another Apple product.

我的修理方法

Repair went perfectly. The hardest step was the initial removing of the screen from the case. (I did find that very careful use of an Xacto knife . . .

我的问题

The device was still relatively useful and the repair isn't too hard.

我的修理方法

Quite easily - the hard part is getting the case apart.

我的建议

Use the metal thin tools to release the plastic bezel - the cable to the digitizer is super fragile so be careful removing the bezel after releasing it.

我的问题

The iPods were eating battery juice a lot quicker than when they were new.

我的修理方法

On the first iPod, I tore the flex circuit to the front panel. I was having trouble locating the clips, so that may have been a factor. On the second iPod I made a full-scale guide for finding the clips and used a number 17 ch . . .

我的问题

Could not charge or apply power.

我的修理方法

Went great!! works like a charm!!

我的建议

follow the guide on I fix it!!

我的问题

The battery was dead, and we didn't want to buy a new IPod Touch just cause of that...

我的修理方法

It was perfect! The only "difficult" part was the soldering. But it was pretty easy in fact. No worries about that!

我的建议

Just do it! It's much more cheaper than buying a new IPod Touch, and if you really can't do that, t . . .

我的问题

I went through the normal plug-in for my Ipod, and nothing. I found your site and bought a replacement battery. Installation was as easy as following the directions and looking at the photos. I didn't unplug the touch screen as advised, but had no problem bringing my Ipod back to life. It was like C . . .

我的问题

After charging overnight my battery would go to red line in a few hours.

我的修理方法

The repair went very smoothly. The hardest part was getting the ipod apart. The 7 Philips screws were difficult. Of the 7, 5 came out ok, but 2 had head damaged by the time I was done.... but there was enough left to reassemb . . .

我的问题

Battery was not holding charge

我的修理方法

Opening case hardest part ... takes a while of prying (to the point you might not think it will ever come apart).

One of the opening tools broke doing it ... I then resorted to using guitar picks to hold case open in one spot as I pry'ed in another ... eventually it . . .

我的问题

The rubber gasket around edge is sooo delicate. I had several pieces when finished.

我的修理方法

I will repair/replace gasket with bath tub calk.

我的建议

Need a better photo explaining the construction of front glass, plastic bezel and gasket.

显示更多