iPod Classic 160 GB Parts
iPod Classic (Thin) Replacement Battery
Replace a dead or damaged battery for your Thin iPod Classic with this part. This product is compatible with 80, 120, and 160 GB (thin) iPod Classics.
iPod Classic (Thin) Headphone Jack & Hold Switch
Replace a damaged or dirty headphone jack and hold switch for a 80, 120, or 160 GB Thin iPod Classic.
iPod Classic (Thick) Replacement Battery
Replace a dead or damaged battery compatible with a Thick iPod Classic.
USB Power Adapter for iPhone and iPod
5W adapter used for iPhones and iPods.
iPhone Earbuds & Microphone
Use your device hands-free.
iPod Video or Classic (Thin Case) Hard Drive Cable
Connects hard drive to logic board
iPod Classic Metal Framework
Replace the frame and rubber bumpers that hold the logic board and screen in place.
iPod Classic 80 GB Hard Drive
Replace a broken or damaged hard drive for your 80 GB iPod Classic with this part.
iPod Classic 160 GB (Thin) Hard Drive
Replace a broken or damaged hard drive for your Thin 160 GB iPod Classic with this part.
iPod Classic Screw Set
All screws from iPod / 12 Phillips screws
The "thick" version of 160 GB iPod Classic is the original larger-capacity Classic. Apple has since simplified the Classic line to offer only the "thin" version. In September 2009, a new thin 160 GB was introduced. If you are unsure which version you have (as some parts are not interchangeable between models), perform the following steps:
1) Locate the serial etched on the rear panel of the iPod
2) Go to Apple's Online Service Assistant and enter your serial number and country
3) Look at the text under the picture on the left. If it reads "iPod Classic," you have the thick version. If it reads "iPod Classic (Late 2009)," you have the thin version.
The iPod Classic is quite enigmatic to diagnose when problems occur. Use our iPod Classic troubleshooting guide to figure out what's wrong.
Select a category below or browse all compatible parts to find what you need to fix your iPod!