iPhone 6s A1633 Parts
Grab a toolkit for your iPhone 6s A1633 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Board Component Bundle
This collection of iPhone and iPad components is perfect for anyone learning microsoldering and board level repair.
iFixit Insight iPhone 6s Case
We live to share gadget guts with the world. Now you can show off the insides of your iPhone 6s with a new Insight iPhone Teardown Case.
Flexible LCD holder
iPhone 5 to 6s Plus Front Camera Gasket Pads
Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE (1st Gen), 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.
iPhone 6 Home FPC Connector (J2118)
Replace the home button cable FPC connector on the logic board of an iPhone 6. This part requires microsoldering.
iPhone 6/6 Plus/6s/6s Plus Test Cable for Home Button
This test cable simplifies connecting multiple home button assemblies for the iPhone 6, iPhone 6 Plus, iPhone 6s, or iPhone 6s Plus.
iPhone 6/6s Antenna Interconnect Cable Clip
Replace the small metal clip that holds the antenna cable from the lightning connector assembly against the side of the loudspeaker assembly compatible with the iPhone 6 ...
iPhone 6/6s/7 Backlight Diode
Replace the backlight diode on the logic board of an iPhone 6, iPhone 6s, iPhone 6s, or iPhone 7. This part requires micro soldering.
iPhone 6/6s/7 Battery Adhesive Strips
Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 6, iPhone 6s, and iPhone 7 smartphone models A1549, A1586, A1589, A1633, A1...
iPhone 6s and 6s Plus Front-Facing Camera Holder
Fix a misaligned camera by replacing the plastic guide that centers the front-facing camera over the camera lens opening in the front glass panel. This part is compatible...
iPhone 6s and 6s Plus Home Button Gasket
Replace a torn flexible gasket between the home button assembly and the display assembly in an iPhone 6s or iPhone 6s Plus.
iPhone 6s Audio Control Cable and Brackets
This cable connects the volume buttons and vibrate/ring switch to the logic board. It is compatible with all iPhone 6s models (Not iPhone 6, 6 Plus, or 6s plus).
iPhone 6s Bare Logic Board
Replace a bare circuit board (with no components) compatible with iPhone 6s. This is only the board to which all the surface soldered components would be mounted.
iPhone 6s Battery
Replace a 1715 mAh battery compatible with an iPhone 6s. This replacement does not require soldering and is compatible with iPhone 6s models (not iPhone 6, 6 Plus, or 6s ...
iPhone 6s Battery Connector Bracket
Fix a loose connection causing charging or other battery problems by replacing a bent or missing metal bracket securing the battery connector to the logic board. This par...
iPhone 6s Battery Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 6s. Set of 5 pads.
iPhone 6s Blank Rear Case
This replacement rear case includes no internal components and has no logo or text. It is compatible with an iPhone 6s.
iPhone 6s Cellular Antenna
Replace a cellular antenna compatible with the A1633 and A1688 model iPhone 6s.
iPhone 6s Display Assembly Adhesive
This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 6s.
iPhone 6s Earpiece Speaker
Replace an earpiece speaker compatible with the iPhone 6s model #A1633, A1688, A1700. Fix problems with call audio.
iPhone 6s Earpiece Speaker Bracket
Replace the metal bracket that secures the earpiece speaker to the display assembly compatible with the iPhone 6s model #A1633, A1688, A1700.
iPhone 6s Earpiece Speaker Mesh
Replace a punctured or missing mesh and plastic bezel that covers the earpiece speaker opening compatible with the iPhone 6s. Keep dust and dirt from blocking the speake...
iPhone 6s Flash Bracket
Fix a misaligned flash by replacing a bent or missing metal bracket securing the camera flash to the rear case. This part is compatible with an iPhone 6s.
iPhone 6s Front Camera and Sensor Cable
Replace a front camera and sensor cable assembly compatible with the iPhone 6s. Includes the front camera, secondary microphone, ambient light and proximity sensors. Part...
iPhone 6s Front Panel Assembly Cable Bracket
Fix a loose connection causing a malfunctioning display, digitizer, or camera by replacing a bent or missing metal bracket securing the front panel assembly cable connect...
iPhone 6s Front Panel Clips
Fix a loose front panel assembly by replacing damaged or missing clips from the set of three retaining clips in the edges of the rear case. This part is compatible with a...
iPhone 6s Home Button Assembly
Replace a home button assembly compatible with the iPhone 6s model A1633, A1688, A1700. Includes the home button, cable, and metal ring. Part #00459-01.
iPhone 6s Home Button Bracket
This metal bracket secures the home button assembly to the display assembly.
iPhone 6s LCD and Digitizer PRO
Replace an LCD and digitizer assembly compatible with the iPhone 6s. Includes the Earpiece Speaker Mesh, Front Camera Bracket, Sensor Bracket.
iPhone 6s LCD Shield Plate
Replace a bent or dented LCD shield plate compatible with the iPhone 6s models A1633, A1688, and A1700. Diffuses heat and protects the back of the LCD. This part fits bet...
iPhone 6s LCD Shield Plate Sticker
Replace a torn or missing black adhesive cover on the back of the LCD shield plate compatible with the iPhone 6s model A1633, A1688, and A1700 smartphone.
iPhone 6s LCD/Digitizer FPC Connector (J4200)
Replace a LCD Digitizer cable FPC connector on the logic board compatible with the iPhone 6s model A1633 and A1688. This part requires microsoldering.
iPhone 6s Lightning Connector and Headphone Jack
Replace a lightning connector, headphone jack, dual microphones, or cellular antenna compatible with iPhone 6s models A1633, A1688, A1691, and A1700. Part #821-00078-08. ...
The iPhone 6s is nearly identical in design to the iPhone 6. In response to the “bendgate” design flaws of the previous models, changes were made to improve the durability of the chassis. The 6s was constructed from a stronger, 7000 series aluminum alloy, key points in the rear casing were strengthened, and touchscreen integrated circuits were relocated to the display assembly. Alongside the existing gold, silver, and space gray options, a new rose gold color option was also introduced.
One of the largest reported hardware issues with the iPhone 6s was unexpected battery shutdowns. Apple issued a warranty for phones with a limited span of serial numbers, however if your phone doesn’t fall under this category, don’t worry — iFixit has all the parts necessary for the most common iPhone 6s fixes including dead battery replacements and cracked screens. We’ve got the best iPhone 6s batteries and iPhone 6s screens on the market, along with a complete catalog of other iPhone 6s parts for the less common part swaps.
All iPhone 6s repairs will require a Pentalobe P2 screwdriver in addition to standard precision electronics tools. Any repair that removes the battery from the chassis will require replacement adhesive strips. All iFixit Fix Kits come with all tools and replacement adhesive needed to complete the repair.
Once all parts and tools have been acquired, head to iFixit’s iPhone 6s repair guides for step-by-step instructions on how to make the fix.
The iPhone 6s earned a 7 out of 10 in iFixit’s repairability assessment. Watch the Teardown Review for more: