iPad 3/4 Adhesive Strips

  • iPad 3/4 Adhesive Strips
  • iPad 3/4 Adhesive Strips
iPad 3/4 Adhesive Strips

US$6.99

US$6.99

当产品有货时,我们将给你发送消息。

产品详细说明

描述

描述

Replace the adhesive strips holding the front panel to the rear case of a 3rd or 4th generation iPad. Use these custom cut adhesive strips to fix a loose front panel or to close the case after another internal repair.

备注

Due to continuing improvements, actual product may differ slightly from photo.

兼容性

iPad 3 4G
16 GB LTE/CDMA
16 GB LTE/GSM
32 GB LTE/CDMA
32 GB LTE/GSM
64 GB LTE/CDMA
64 GB LTE/GSM
iPad 3 Wi-Fi
16 GB
32 GB
64 GB
iPad 4 CDMA
16 GB
32 GB
64 GB
iPad 4 GSM
16 GB
32 GB
64 GB
iPad 4 Wi-Fi
16 GB
32 GB
64 GB

显示 2 个更多的设备

维修的故事

我的问题

Somehow the connector broke. Not sure what happened, but the device stopped charging and was therefore completely useless without the dock connector.

我的修理方法

The repair itself I thought went quite well. It was fairly tricky. I have repaired a lot of electronics before but taking the screen off and on was the . . .

我的问题

We shattered our iPad 4 display glass. It was not worth it to buy a new one with Apple so we decided to replace the glass and perform the repair ourselves.

我的修理方法

I admit I bought the glass from another third party source originally. With a lack of proper instructions I accidentally cracked the glass on . . .

我的问题

The digitizer broke. Luckily, the LCD is still working (and without a scratch!)

我的修理方法

As I stated in the title, as long as you are patient and through when removing the broken glass, clean things out with some canned air, this is a simple job.

我的建议

To ensure the digitizer attaches firmly to the case, I placed a . . .

我的问题

the phone was not holding a charge

我的修理方法

The teardown was not that difficult using my Pro tool set from iFixit. It took me about 15 minutes to get to the part and remove it. During the removal of the bad dock i noticed a flex cable pop out and did not really pay attention to it like I should. Placed eve . . .

我的问题

My wife's iPad 3rd Generation fell out of my truck and the front panel shattered. Then I broke the LCD while trying to repair the front panel.

我的修理方法

I had a difficult time removing the front panel even with the iOpener. This would have certainly been an easier process if my front panel were not completel . . .

我的问题

Well anyone who has a iPad know that one day they might get just a bad screen due to the poor connection solder joints on the logic board

我的修理方法

Followed the instructions and it was way to easy

我的建议

Read all the instructions cause with out those it will cost you more money cause they are very informative

我的问题

The docking connector was damaged and not able to charge the iPad.

我的修理方法

The repair took a LOT longer than expected. The iopener heating device was marginal - I had to use a hair dryer in conjunction with the iopener heating device to loosen the adhesive. The plastic opener tools supplied in the kit did N . . .

我的问题

The screen shows only snow.

我的修理方法

The iFixIt repair components worked fantastically! I was able to use the heat gun to melt the adhesive holding the touch pad digitizer to the iPad frame. i used: the set of picks to help separate the digitizer from the frame without damaging the plastic ring around the c . . .

我的问题

My friend dropped his iPad down a set of stairs. it took a direct hit to the corner when it hit the tile floor at the bottom. Yhe Retina display stopped functioning. fortunately the touch screen survived. Using the manuals on this site I was able to safely remove the touch panel and see that the iss . . .

我的问题

Bought an iPad, dropped it a couple times (on accident obviously) and ended up messing up the LCD display and it wouldn't turn on anymore. APPLE said they can fix it for $300

我的修理方法

Went super smooth. It was easier then I thought and didn't run into any problems. ifixit says it difficult to replace the iPa . . .

显示更多