iPad 1st Gen Parts
Replacement parts for your iPad 1st Gen model to fix your broken tablet!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Replace a 6600 mAh battery compatible with iPad 1st Gen A1219 and A1337 models Wi-Fi and 3G. Battery model #A1315. 3.7 Volts (V). Part #616-0448.
iPad Adhesive Strips
This custom-cut adhesive film secures the front panel to the front frame compatible with the 1st Generation Wi-Fi model A1219 iPad tablet.
iPad Wi-Fi Antenna
Replace the Wi-Fi antenna that fits in the lower edge of the Wi-Fi only first generation iPad tablet model A1219.
iPad Display Clip Set
Replace the broken or missing spring clips on the back of the first generation iPad display screen with this part.
iPad Speaker Assembly
This assembly includes two speakers and the plastic speaker enclosure for the 1st generation iPad Wi-Fi.
iPad 3G Screen Digitizer
Touch portion of display with the frame, antenna, home button and clips.
iPad Display Clip
Replace a broken or missing spring clip on the back of the 1st generation iPad display screen.
iPad 3G (1st Gen) Logic Board
Replace a broken or malfunctioning motherboard in a 1st Generation iPad 3G.
iPad Power Button
This is the external plastic power button cover. It does not include the internal power button switch.
iPad Volume Button
This is the external plastic volume button cover. It does not include the internal volume button switch.
The first generation of the iPad established design precedents, some of which, such as the home button placement, have persisted through all models. The device features an Apple A4 processor — which is comprised of a 1 GHz processor, 256 MB of RAM and a PowerVR SGX535 GPU — and a 9.7” touchscreen display with 1024x758 pixel resolution and 132 ppi. The first generation iPad is equipped with either 16, 32, or 64GB of solid-state memory for program and data management.
There are two models of the first generation iPad. The Wi-Fi variant was released in the United States on April 3, 2010, followed by the Wi-Fi and Cellular variant on April 30, 2010. Unlike its successors, the Wi-Fi and cellular variant of the first generation iPad can only support GSM/UMTS standards and is not compatible with CDMA networks.
Select your model above for parts, guides and more.