Spudger

  • Spudger / Individual
  • Spudger / Individual
  • Spudger / 100
  • 360°
360
Spudger

$2.99

$2.99

当产品有货时,我们将给你发送消息。

产品详细说明

描述

描述

Safely poke and pry just about anything.

A spudger is a tough antistatic tool that can be used for a variety of purposes when repairing electronic devices. The 5" tool is made of nylon and has one flat end and one pointed end. The pliable and antistatic properties make it ideal for working around sensitive electronic components without fear of shocking or scratching them.

The pointed flat side can be used to disconnect connectors, remove thermal paste from a heat sink, pry off components, aid in soldering, or just to unscrew a MacBook's battery. The pointed end of the spudger can be used to connect/disconnect components, hold objects for soldering, or poke something that requires poking. The tool also includes a notch for hooking wires.

We find this spudger to be the perfect size for most repairs. However, when you need a tougher prying/poking tool, we also carry our Heavy Duty Spudger, a more robust version of this tool. This product is included in a lot of our toolkits, but it's especially helpful in the Classic Pro Tech Toolkit and Soldering Workstation.

Compatible with Apple's "Black Stick", Apple part number 922-5065

How does one go about pronouncing 'Spudger' anyhow?

维修的故事

Dan Oliver's Story Photo #1417246

我的问题

My MacBook Pro became really hard to charge. The MagSafe charger had to be put on just right, and it was getting harder and harder to charge. We have two chargers and both had the issue, so I felt sure the problem was on the computer side.

我的修理方法

Thanks to the great iFixit instructions and the spudger (grea . . .

Tamer's Story Photo #1352444

我的问题

Old battery was making phone shut down at 20%

我的修理方法

I followed well made instructions exactly and the repair went better than I expected. I replaced old batteries on two iPhones so I bought one repair kit and then just one more battery. I didn't realize that the sticky tape was considered a seperate par . . .

我的问题

Hero 4 was freezing despite all the suggested fixes on line, I decided to replace the image sensor

我的修理方法

I had no problem following the Fixit Instructions and replacing the image sensor. My Hero 4 now works again

我的建议

The most difficult part was removing the front panel - particularly the small tab just above t . . .

我的问题

The connection to the power cord was faulty. The light on the power cord would often times go out unless I put it at exactly the right angle. It also alternated between amber and green when charging. Furthermore, one of the terminals on the laptop power connector showed burn marks.

我的修理方法

The repair went re . . .

我的问题

Battery percentage would greatly reduce, like 73% then 20 min later be at 30%. You would plug it up and then it would show 69%.

我的修理方法

Went well. Had trouble with the adhesive tab breaking off. Had to use spudger to pry battery up a little then I was able to use the tweezers to get the adhesive strip and wa . . .

我的问题

- Faster and bigger disk needed --> SSD 1TB

- Battery is out (quick discharging) --> new battery

- RAM more needed --> 8 GB

我的修理方法

Easily with tool and guidelines. Result - perfect!!

我的建议

Just used the iFixit guides. Very useful. Thanks!

我的问题

My original battery quit working -- not only would not hold a charge but would not even work when plugged in.

我的修理方法

The repair went great. Easy instructions.

我的建议

Consider buying the P-5 Pentalobe and T-5 Torx screwdrivers and the spudger from IFIXIT. I couldn't find Pentalobe drivers at my local Ace hardware. . . .

我的问题

Somehow my LCD screen had gotten broken. I wish I had some cool story, but I literally have no idea.

我的修理方法

I’ve never done anything like this, but I figured it was worth a $23 investment for a new LCD screen and two tools as opposed to spending several hundred dollars on a new GoPro. Worst case, I’d be . . .

我的问题

My 5S has been giving me battery problems for about 6-9 months and eventually I got tired of having to charge my phone almost every 2 hours. Sometimes my battery would drop suddenly (60 to 20% and other random disparities). My camera also stopped working around the same time due to "overheating" so . . .

我的问题

Battery was going dead after about 6 hours

我的修理方法

It was difficult, but by following instructions I got it done.

我的建议

Take your time!!!!

显示更多