Prying and Opening Tool Assortment

  • Prying and Opening Tool Assortment
Prying and Opening Tool Assortment

US$9.99

US$9.99

当产品有货时,我们将给你发送消息。

所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

浏览我们的商店

Ever fixed something? That’s Genius.

Share your repair story with #ImAGenius

We Are All Geniuses

Share your repair story with #ImAGenius

产品详细说明

描述

描述

This tool assortment includes the most sought after Picks, Spudgers, Prying Tools, and more for electronics opening and component manipulation.

Includes:

维修的故事

用户头像
John Fitzgerald's Story Photo #1310284

我的问题

The back button on my phone was operating as if it was being pressed randomly.

我的修理方法

I've replaced the camera before (thanks to Ifixit), so the disassembly went smoothly.

我的建议

Because it isn't specifically in the guide, there are a couple of small pieces (I think a speaker cover and the vibrator (for lack of a . . .

用户头像

我的问题

The microphone had stopped working on my wife's first gen Pixel phone and warranty had lapsed about a month before.

我的修理方法

Repair went pretty smoothly. Don't have a microwave so couldn't use the iOpener gel tube that came with repair kit (tried putting it in hot water but didn't really work) so used hair dr . . .

用户头像

我的问题

My battery was at times barely lasting for half the day. It would randomly shut down even while displaying a reasonable amount of power remaining. Processor slowdown is real and painful.

我的修理方法

Removing the adhesive on the battery was the most difficult part. The tabs ripped as soon as I tugged on them, . . .

用户头像

我的问题

My phone still works great, but the battery was so old that it just wouldn't hold a decent charge anymore. The phone was not designed for the battery to be user-replaceable.

我的修理方法

IFixIt assured me of how to go about it. I researched online and finally found a reputable replacement battery supplier, and I . . .

用户头像

我的问题

Extend the life and keep these material out of landfill or contamination of other natons..

我的修理方法

Perfect.

我的建议

Not too hard, go for it!

用户头像

我的问题

My friend dropped my op1 and the red encoder hit the edge of the table. After the fall the red encoder only worked when holding pressure to the right and then spinning the encoder. Otherwise it would not register when turning it normally. I thought it just might be a mechanical issue but was not sur . . .

显示更多