Omnivise Board Holder Hakko C1390C
The Omnivise was designed to hold printed circuit boards level while reworking them, but it can adapt easily to anything in the horizontal plane.
- Adjustable height from bottom base to top of riser: 2.8, 3.1, 3.3, 3.6, 3.8 in. increments (72.5, 78.0, 84.5, 91.0, 97.5 mm)
- Adjustable opening from 0 to 0.8 in (0 to 20mm)
- Padded jaws to protect from damage to delicate surfaces
- ESD safe