Unibody 8x SATA SuperDrive (Pre-Mid 2009)

  • Unibody 8x SATA SuperDrive (Pre-Mid 2009) / Used
Unibody 8x SATA SuperDrive (Pre-Mid 2009)

条款: 用过的

US$49.99

US$49.99

当产品有货时,我们将给你发送消息。

Android 维修工具包

一个新的屏幕或电池就在一个套件之内。

现在开始购物

Android 维修工具包

一个新的屏幕或电池就在一个套件之内。

现在开始购物

产品详细说明

描述

描述

Replace a damaged or malfunctioning dual-layer SATA drive.

兼容性

兼容性

  • All 13" Unibody MacBooks (Model A1278)
  • Late 2008 or Early 2009 Unibody 15" MacBook Pros
  • Early or Mid 2009 Unibody 17" MacBook Pros

产品规格

产品规格

Part #:
661-5147
Speed:
8x DVD-R write
4x DVD-RW write
8x DVD+R write
4x DVD+RW write
4x DVD+R (DL) write
24x CD-R write
10x CD-RW write
8x DVD read
24x CD read

兼容性

MacBook Pro 15" Unibody Late 2008 & Early 2009
2.4 GHz
2.53 GHz
2.66 GHz
2.8 GHz
2.93 GHz
MacBook Pro 17" Unibody
2.66 GHz (Early 2009)
2.8 GHz (Mid 2009)
2.93 GHz (Early 2009)
3.06 GHz (Mid 2009)
MacBook Unibody A1278
2 GHz
2.4 GHz

维修的故事

User avatar
Sondre Selnes's Story Photo #257497

我的问题

The fan on my MacBook Pro was reaching its end. It was terrible noisy ! I was in the middle of a programming project for the iPhone and making video guide for the new software, when the fan of my computer broke down. I had to stop all recording (Big Blue Yeti mic, ScreenFlow recording...).

我的修理方法

The vi . . .

User avatar

我的问题

Old drive was becoming unreliable

我的修理方法

Instructions were spot on.

我的建议

Tweezers are a must on this repair. The small screws are easy to remove but the bulk of the time is spent replacing them when you do not use tweezers. I used a plastic knife rather than a spudger. Worked just fine.

User avatar

我的问题

Fan bearing started getting noisy and then fan started to be slow/intermittent causing overheat shutdown of the MacBook.

我的修理方法

Watched your video to see what I was in for. Seemed relatively straightforward. Opened up the case and got to the fan. 2 of the 3 Philips screws came out easy. One was REALLY torqu . . .

User avatar

我的问题

The old fan had worn out bearings which caused lots of noise and bad performance.

我的修理方法

The switch went well. Took about 30 minutes because the screws were stripped. The comments were very helpful.

我的建议

If the screws are stripped, take a similar size flat screwdriver and put at 45 degrees into the screw so the s . . .

User avatar

我的问题

CPU temperatures had started to spike on my laptop (80C or higher) while doing mundane things at low percentages of CPU, and fan didn't spin up to cool the machine. Apple did diagnostics, said all was well. Temperature Gauge Pro detected a problem with fan, however, so I ordered a replacement to s . . .

User avatar

我的问题

Loud noises prompted me to take my Macbook Pro to the Genius Bar. They wanted to keep it for 3+ days to replace the fan, at a pretty significant cost. I happen to be blessed with a very smart teenager who cut his teeth on taking Mac's apart. Quick order on iFixit, an even faster delivery, and voi . . .

User avatar

我的问题

battery only lasted about an hour fully charged, and it the whole computer would rapidly overheat.

我的修理方法

A bit scary. The battery went in without a hitch, but when removing the old fan, the socket ripped off of the circuit board. I ended up soldering the individual wires back on. Now it works great though! . . .

User avatar

我的问题

The old fan had become noisy - bearings worn out probably. (After taking it out, I could see the blades spun crooked.)

我的修理方法

Pretty easy repair, only 3 internal screws. The connector is a little tricky since it's so small, you tend to think you're gonna break it. Go slowly around the edges and it'll com . . .

User avatar

我的问题

My fan was making a god awful sound whenever my macbook would start heating up. This had been happening ever since an unfortunate crepe experience where I managed to spill lemon-sugar syrup into my keyboard.

我的修理方法

The repair was incredibly straight forward. It was a very minimal risk procedure.

我的建议

Be prepared . . .

User avatar

我的问题

The blades on the original fan had broken and was making a lot of noise when it spun up.

我的修理方法

I've opened the computer many times before so the repair was a piece of cake. ~5 minutes in total.

我的建议

-

显示更多