MacBook Pro 13" Unibody Mid 2009 Screws
选择类别
- 全部
- Accessories
- Adapters
- Batteries
- Cables
- Case Components
- 消耗品
- Display Components
- Fans
- Hard Drive Brackets
- Hard Drive Enclosures
- Hard Drives
- Hard Drives (SATA)
- Keyboards
- Logic Boards
- MagSafe Boards
- Memory Maxxer Kits
- Microphones
- Optical Drives
- RAM
- Rubber Feet
- Screens
- Screws
- 软件业
- Speakers
- SSD Upgrade Kits
- SSDs
- Trackpads
和 MacBook Pro 13" Unibody Mid 2009兼容的零件：
Macbook Pro Unibody Lower Case Screw Set
Replace a stripped or missing screw securing the lower case of most Unibody model MacBook Pro laptops. The excluded models are the Late 2008 and Early 2009 15" MacBook Pr...
Macbook Pro Unibody Lower Case Screw and Foot Kit
Replace a missing or scuffed plastic foot or a missing screw securing the lower case of most Unibody model MacBook Pro laptops.
MacBook Pro Unibody (Mid 2009-Mid 2012) Trackpad Mounting Screws
Replacement screws and springs for mounting the trackpad in the upper case assembly of mid 2009 through mid 2012, 13" and 15" MacBook Pro Unibody laptops.
MacBook Pro 13" Unibody (A1278 Mid 2009-Mid 2010) Screw Set
This set includes all the screws except those from the hard drive bracket, display assembly, and battery connector cover.
电子设备简介
With the Mid 2009 model 13 inch MacBook Pro Unibody laptop, Apple brought back the Firewire 800 port, added an SD card slot, and increased the processor speed.
The most common repairs with the MacBook Pro 13" Unibody for Mid 2009 are replacing a dead battery or upgrading the hard drive or RAM. The MacBook Pro 13" Unibody (Mid 2009) Memory Maxxer RAM Upgrade Kit includes all the parts and tools you need to upgrade to 8 GB of RAM.
The MacBook Pro 13" Unibody for Mid 2009 requires a Tri-point Y0 Screwdriver to remove the battery. The battery kit includes all the needed tools.
Once you've bought your parts and tools, check out iFixit's MacBook Pro 13" Unibody for Mid 2009 repair guides for step-by-step instructions on how to make the fix.