跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 4

步骤 4
Using a pair of blunt tweezers, push on the tabs of the small white connector to separate it from the motherboard. The entire bottom casing should lift with no resistance. If there is too much resistance, verify you removed all the screws, and run the plastic spudger tool around the face-plate again. The entire bottom casing should lift with no resistance. If there is too much resistance, verify you removed all the screws, and run the plastic spudger tool around the face-plate again.
  • Using a pair of blunt tweezers, push on the tabs of the small white connector to separate it from the motherboard.

  • The entire bottom casing should lift with no resistance. If there is too much resistance, verify you removed all the screws, and run the plastic spudger tool around the face-plate again.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可