跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Carefully slide the LCD out of its holder until the connector, highlighted in blue, is visible. Open the clip on the connector by pulling it with your fingernail to the right of the screen. Remove the damaged LCD and insert the replacement. After clipping the connector again, reassemble the camera using the six (6) previously removed screws.
  • Carefully slide the LCD out of its holder until the connector, highlighted in blue, is visible. Open the clip on the connector by pulling it with your fingernail to the right of the screen.

  • Remove the damaged LCD and insert the replacement.

  • After clipping the connector again, reassemble the camera using the six (6) previously removed screws.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可