菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的22指南。

返回指南
英语
中文
上一步

正翻译步骤 5

步骤 5
With the display panel still lifted, disconnect the four inverter cables. During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush.

  • With the display panel still lifted, disconnect the four inverter cables.

  • During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush.

  • During reassembly, the order of the inverter cables is interchangeable within each socket.

  • If you are replacing a hard drive and have an extra set of hands, it is possible to reach in and remove the drive without disconnecting anything but the LCD temp and display connector in the previous step with the LCD in its propped position.

当提起显示面板的时候，断开四条变频器电缆。

在重新安装时，将四个变频器电缆连接器放置在连接到后面板的组件之间的空隙中，以使显示面板齐平。

在重新组装时，变频器电缆的顺序可在每个插座内互换。

如果要更换硬盘，需要额外的帮手，来以进入内部并取出硬盘，而不必断开上一步中的LCD温度和显示连接器，只需将LCD支撑起来。

在开源创作共享许可协议下，你的投稿已被许可。