跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的22指南

英语
中文

正翻译步骤 1

步骤 1
Pull the LCD temperature sensor connector straight up out of its socket on the logic board. If necessary, de-route the LCD temperature sensor cable from behind the logic board.
  • Pull the LCD temperature sensor connector straight up out of its socket on the logic board.

  • If necessary, de-route the LCD temperature sensor cable from behind the logic board.

  • When you remove the LCD, check the routing of the LCD temperature display cable. On reinstalling the display, be sure this cable does not block one of the bottom screws for the front bezel.

从逻辑板上径直拉起LCD温度传感器的连接插头。

如果有必要,请将LCD温度传感器电缆从逻辑板背面取下。

当您取出LCD时,请检查LCD温度显示电缆的布线。 重新安装显示屏时,请确保此电缆未阻塞前挡板的底部的一个螺丝。

在开源创作共享许可协议下,你的投稿已被许可