跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
Unplug all cables from the Apple TV before disassembly and flip the device over. Using the widest plastic opening tool, force its sharp end into the seam between the Apple TV's  bottom plate and its outer casing. Starting on the side with the ports, insert the tool so its tip is angled upward when leverage is applied. Pry the bottom plate away from the case, starting with the edge closest to the bottom of the apple. Work your way around the plate until all clips are disconnected.
Remove the Heatsink
  • Unplug all cables from the Apple TV before disassembly and flip the device over.

  • Using the widest plastic opening tool, force its sharp end into the seam between the Apple TV's bottom plate and its outer casing. Starting on the side with the ports, insert the tool so its tip is angled upward when leverage is applied.

  • Pry the bottom plate away from the case, starting with the edge closest to the bottom of the apple. Work your way around the plate until all clips are disconnected.

  • With the plastic clips free, lift the bottom plate.

  • The bottom plate is held in place by plastic clips that correspond to indentations on the bottom plate. These indentations break easily, as evidenced by the third photo (breakage will not prevent the plate from going back on). To avoid breakage, apply force at the location of these clips, starting from the middle.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可