修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南。

返回指南
英语
中文
下一步

正翻译步骤 1

步骤 1
The rear panel is secured by 10 screws. Using a #00 Phillips Screwdriver, remove the ten 1.2 mm screws. The screwdriver should be inserted at the same angle as the screws.

  • The rear panel is secured by 10 screws. Using a #00 Phillips Screwdriver, remove the ten 1.2 mm screws.

  • The screwdriver should be inserted at the same angle as the screws.

  • Be sure to keep track of the screws and where they came from. Some only fit in to one spot.

后面板（D面）采用10颗螺丝固定。 可以使用飞利浦#00螺丝刀，卸下四周的10颗1.2 mm螺丝。

螺丝刀应以与螺钉相同的角度插入。

务必记住卸下的每颗螺丝位置。因为螺丝的规格并不相同。

在开源创作共享许可协议下，你的投稿已被许可。