跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 5

步骤 5
The controller is now ready for the new bumper assembly. Align the new bumpers onto the top of the controller by holding down the triggers and aligning the four pins on both sides. Set the new home button cover over the micro USB port, push the home button in, and pull the cover over the two pins shown.
  • The controller is now ready for the new bumper assembly.

  • Align the new bumpers onto the top of the controller by holding down the triggers and aligning the four pins on both sides.

  • Set the new home button cover over the micro USB port, push the home button in, and pull the cover over the two pins shown.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可