Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的30指南

英语
中文

正翻译步骤 3

Step 3
When reassembling the bezel: be sure to tuck the microphone cable and connector into the void next to the camera board.
  • When reassembling the bezel:

  • be sure to tuck the microphone cable and connector into the void next to the camera board.

  • Gently guide the microphone connector and cables through the ±1in long slot at the right of the iSight camera. Once the bezel is properly assembled, gently push the microphone connector and cable into the bezel through that slot.

在此插入翻译

在此插入翻译

在此插入翻译

[* icon_reminder] When reassembling the bezel:
[* black] be sure to tuck the microphone cable and connector into the void next to the camera board.
[* black] Gently guide the microphone connector and cables through the ±1in long slot at the right of the iSight camera. Once the bezel is properly assembled, gently push the microphone connector and cable into the bezel through that slot.

在开源创作共享许可协议下,你的投稿已被许可