跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 17

步骤 17
The end is in sight, and we're powering through the remaining components in the rear case. This first little bracket is covered in spring connectors and EMI grounding fingers, and has a ribbon cable stuck to the back. Next out is the lower speaker enclosure, replete with ooey gooey waterproofing adhesive around the port.
  • The end is in sight, and we're powering through the remaining components in the rear case.

  • This first little bracket is covered in spring connectors and EMI grounding fingers, and has a ribbon cable stuck to the back.

  • Next out is the lower speaker enclosure, replete with ooey gooey waterproofing adhesive around the port.

  • And lastly, the Taptic Engine and famed barometric vent are freed. Apple's Taptic Engine continues to be a linear oscillator vibration motor.

拆解即将完成,我们现在将会开始背板的拆解

第一个取出来的是一个带有弹簧连接器以及EMI接地触点的小支架,并带有一条带状电缆

接下来是低音喇叭模块,在其接口周围充满了用于防水的粘性防水胶

最后,我们拆出了Taptic Engine和著名的气压计, 苹果的Taptic Engine仍然是一个线性振动电机

在开源创作共享许可协议下,你的投稿已被许可