跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 1

步骤 1
Insert the flat end of a spudger between the display inverter and the front display bezel near the center of the inverter. Run the spudger along the length of the display inverter, separating it from the adhesive securing it to the front display bezel.
  • Insert the flat end of a spudger between the display inverter and the front display bezel near the center of the inverter.

  • Run the spudger along the length of the display inverter, separating it from the adhesive securing it to the front display bezel.

  • Lift the inverter out of the front display bezel.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可