跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 2

步骤 2
In the next few steps, you will loosen the adhesive from underneath the battery, the logic board, and the frame under the battery. Do this slowly, carefully, and evenly. Take care not to puncture the battery or bend the logic board. Use a plastic opening tool to pry up the adhesive around the three exposed edges of the battery. Do not try to pry the battery out, just start loosening the adhesive.
  • In the next few steps, you will loosen the adhesive from underneath the battery, the logic board, and the frame under the battery. Do this slowly, carefully, and evenly. Take care not to puncture the battery or bend the logic board.

  • Use a plastic opening tool to pry up the adhesive around the three exposed edges of the battery.

  • Do not try to pry the battery out, just start loosening the adhesive.

在接下来的几个步骤中,您将松开电池下面的粘合剂,逻辑板和电池下面的框架。 慢慢地,小心地,均匀地做。 注意不要刺破电池或弯曲逻辑板。

使用塑料开口工具撬起电池三个暴露边缘的粘合剂。

不要试图撬开电池,只要开始松开胶粘剂。

在开源创作共享许可协议下,你的投稿已被许可