跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 5

步骤 5
Once all of the adhesive is freed from under the logic board/battery assembly, lift the assembly up from the side and carefully rotate it over to access the underside of the battery. The logic board is still attached to the rear case. Do not try to completely separate the assembly, or you will rip this ribbon cable. The logic board is still attached to the rear case. Do not try to completely separate the assembly, or you will rip this ribbon cable.
  • Once all of the adhesive is freed from under the logic board/battery assembly, lift the assembly up from the side and carefully rotate it over to access the underside of the battery.

  • The logic board is still attached to the rear case. Do not try to completely separate the assembly, or you will rip this ribbon cable.

一旦所有粘合剂从逻辑板/电池组件下面被释放,从侧面提起并小心地旋转以接近电池的下侧。

逻辑板仍然连接到后壳。 不要试图完全分离组件,否则你会撕裂这条带状电缆。

在开源创作共享许可协议下,你的投稿已被许可