跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 3

步骤 3
After the edges of the battery are loosened, begin prying up the edge of the logic board. Start at the top and work your way down the side of the board. To prevent bending/breaking the logic board, do not try to remove the logic board, yet. The dock connector is still embedded in the frame. Again, you are only trying to loosen more of the adhesive.
  • After the edges of the battery are loosened, begin prying up the edge of the logic board. Start at the top and work your way down the side of the board.

  • To prevent bending/breaking the logic board, do not try to remove the logic board, yet. The dock connector is still embedded in the frame. Again, you are only trying to loosen more of the adhesive.

电池边缘松动后,开始撬起逻辑板的边缘。 从顶部开始,沿着电路板的方向前进。

为了防止弯曲/折断逻辑板,请勿尝试移除逻辑板。 底座连接器仍然嵌入在框架中。 再次,你只是试图松动更多的粘合剂。

在开源创作共享许可协议下,你的投稿已被许可