跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

步骤 1
With a plastic opening tool, gently pry the iPod's speaker out of its recess in the outer case. Do not try to completely remove the speaker. It is still soldered to the underside of the logic board. Allow the speaker to rest above the battery so that you can proceed with battery installation.
  • With a plastic opening tool, gently pry the iPod's speaker out of its recess in the outer case.

  • Do not try to completely remove the speaker. It is still soldered to the underside of the logic board.

  • Allow the speaker to rest above the battery so that you can proceed with battery installation.

使用塑料打开工具小心地将iPod的扬声器从外壳的凹槽处翘出。

切勿完全移走扬声器,它们的底部仍然与逻辑板相焊接。

让扬声器放在电池上方,以便接下来继续安装电池。

在开源创作共享许可协议下,你的投稿已被许可