跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
In the next few steps, you will desolder the three battery solder joints on the logic board.
  • In the next few steps, you will desolder the three battery solder joints on the logic board.

  • Prior to desoldering the 3 leads, there may be some silicon/glue covering them. Remove as much as possible with a plastic or metal spudger (if metal, be extremely careful not to bridge the connections) before applying soldering tip to points.

在接下来的几个步骤中,您将拆除电路板上的三个电池焊点。

在拆焊3根引线之前,可能会有一些硅胶覆盖它们。 使用塑料或金属spudger撬棒(如果是金属,要非常小心不要桥段连接)尽可能多的去除焊点。

在开源创作共享许可协议下,你的投稿已被许可