跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Grip the copper shield located on the bottom of the battery with one hand while firmly holding the battery with the other. Carefully peel the copper shield up off the battery.
  • Grip the copper shield located on the bottom of the battery with one hand while firmly holding the battery with the other.

  • Carefully peel the copper shield up off the battery.

  • Do not rapidly peel the copper shield. Doing so may cause irreversible damage to the battery.

  • When installing a new battery, the copper shield must be as flat as possible. Otherwise the ruffled shield will add to the thickness of the battery and LCD combined.

用一只手捏住位于电池底部的铜制屏蔽罩,同时用另一只手牢牢捏住电池。

小心地将铜屏蔽罩从电池上剥下来。

不要迅速剥离铜护罩。 否则可能会对电池造成不可挽回的损坏。

安装新电池时,铜屏蔽层必须尽可能平坦。 否则电池和LCD相结合时会增加厚度

在开源创作共享许可协议下,你的投稿已被许可