跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 2

步骤 2
Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying. Insert the edge of an iPod opening tool between the front glass panel and the  plastic bezel near the home button.
  • Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.

  • Insert the edge of an iPod opening tool between the front glass panel and the plastic bezel near the home button.

  • Do not try to pry between the plastic bezel and the steel rear case.

  • Pry the bottom edge of the front panel upward, being careful not to bend the glass excessively.

  • If it is too difficult to pry up the front panel assembly, reheat it and try again.

当心,因为触摸将是非常热的。使用 时用毛巾拿着它可能会有帮助。

将撬棒的边缘插入前玻璃面板和靠近home键的塑料挡板之间。

不要试图在塑料表圈和钢制后盖之间撬动。

向上撬前面板的底部边缘,注意不要过度弯曲玻璃面板。

如果撬起前面板组件太困难,请重新加热并重试。

在开源创作共享许可协议下,你的投稿已被许可