修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.
Remove the Touch ID sensor

  • Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.

  • Flip the display assembly over. Use a hairdryer or prepare an iOpener and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath.

  • Don't overheat the display. It should be slightly too hot to touch comfortably.

添加一个标题

加热 home键/Touch ID传感器 的周围有助于软化固定排线的粘胶，使其能更容易、更安全地被移除。

将屏幕总成翻到正面。使用一个吹风机或准备一个iOpener，加热屏幕底端大约90秒来软化下面的粘胶。

不要使屏幕过热。应该加热到微热，触摸起来舒服的温度。

[title] Remove the Touch ID sensor
[* icon_note] Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.
[* black] Flip the display assembly over. Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath.
[* icon_caution] Don't overheat the display. It should be slightly too hot to touch comfortably.

在开源创作共享许可协议下，你的投稿已被许可。