修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 2

步骤 2
Use an opening tool to pry under the left edge of the home button cable connector to disconnect it from its socket. If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat end of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor. If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat end of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.
Disconnect the Touch ID sensor

  • Use an opening tool to pry under the left edge of the home button cable connector to disconnect it from its socket.

  • If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat end of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

添加一个标题

使用一个撬棒将home键排线插头的左侧撬起以将其断开连接。

如果在您尝试撬起插头时，整个插座插头在分离之前就开始翘起，应使用撬棒的平直端将插座的上端固定住后再进行插头插座的分离。请小心不要损坏插头或插座，否则传感器将永久失灵。

[title] Disconnect the Touch ID sensor
[* black] Use an opening tool to pry under the left edge of the home button cable connector to disconnect it from its socket.
[* icon_caution] If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat end of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.
[* icon_caution] If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat end of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

在开源创作共享许可协议下，你的投稿已被许可。