跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 1

步骤 1
Grab the tabs on the side of the ribbon cable's connector and pull gently outwards to loosen it. Remove the ribbon cable for the power button by grabbing the cable with tweezers and sliding it outwards horizontally.
  • Grab the tabs on the side of the ribbon cable's connector and pull gently outwards to loosen it.

  • Remove the ribbon cable for the power button by grabbing the cable with tweezers and sliding it outwards horizontally.

  • The ribbon cable for the power button is located on the side of the device opposite from the focus knob.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可