跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 3

步骤 3
Be careful not to lift the sensor array too far from the rest of the device because the camera ribbon cable may tear. Lift the sensor array away from the rest of the Vive until the camera cable tugs back and hold it in place. The camera ribbon cable must be pulled out of its socket vertically, as opposed to all other ribbon cables which slide out horizontally.
  • Be careful not to lift the sensor array too far from the rest of the device because the camera ribbon cable may tear.

  • Lift the sensor array away from the rest of the Vive until the camera cable tugs back and hold it in place.

  • The camera ribbon cable must be pulled out of its socket vertically, as opposed to all other ribbon cables which slide out horizontally.

  • Disconnect the camera by lifting its ribbon cable up and away from the motherboard using a pair of ESD safe tweezers.

  • Lift the sensor array upwards away from the motherboard to separate the array from the device fully.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可