注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。
正翻译步骤 3
步骤 3
-
Using a Phillips PH00 screwdriver, remove the silver Phillips 3.5 mm screw circled in red.
-
Using a spudger, gently lift off the small metal tab that was held in place by the screw.
-
Gently pry off the orange ribbon wire on the back panel.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。