跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 1

步骤 1
Orient the Vive so that the camera is facing towards you and the connector ports are facing upwards. There are four screws you need to remove that are covered with small black stickers (two on top, two on bottom). Use a plastic opening tool to gently pry up the left side of the outer sheath.
  • Orient the Vive so that the camera is facing towards you and the connector ports are facing upwards.

  • There are four screws you need to remove that are covered with small black stickers (two on top, two on bottom).

  • Use a plastic opening tool to gently pry up the left side of the outer sheath.

  • If the left sheath is glued down, slide your plastic opening tool along the middle seam to break the bond.

  • Slide the left side of the sheath outwards.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可