跳转到主内容
英语
中文

正翻译步骤 14

步骤 14
Attach the cut end of the primer fuel line to the intake port of the primer bulb (shorter nipple) Slide the carburetor back off of the mounting bolts Cut and remove the remaining old fuel lines by pulling them through the housing
  • Attach the cut end of the primer fuel line to the intake port of the primer bulb (shorter nipple)

  • Slide the carburetor back off of the mounting bolts

  • Cut and remove the remaining old fuel lines by pulling them through the housing

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可