跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Remove the CCD and the lens ribbon cable from the connectors. To release the CCD cable, gently slide the brown clips on either side to the left. This will release the cable. Desolder the connector from the top PCB. Use a soldering wick and flux to make the task easier.
  • Remove the CCD and the lens ribbon cable from the connectors.

  • To release the CCD cable, gently slide the brown clips on either side to the left. This will release the cable.

  • Desolder the connector from the top PCB. Use a soldering wick and flux to make the task easier.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可