跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
LCD holder removed from logic board disconnect the ribbon cable from the logic board. This one requires to move the brown tabs on the left and right hands side in an upward direction. They should just slide up by about an 1/8th of an inch. this will free the ribbon cable. With the ribbon cable disconnected, remove the front case.
  • LCD holder removed from logic board

  • disconnect the ribbon cable from the logic board. This one requires to move the brown tabs on the left and right hands side in an upward direction. They should just slide up by about an 1/8th of an inch. this will free the ribbon cable.

  • With the ribbon cable disconnected, remove the front case.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可