注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 6

步骤 6
Just a few turns from our Phillips and tri-point drivers and the display is free ... to hit the bench. For the full scoop on the display, check out our iPhone 8 Teardown. Our parts testing crew reports that the 8 and 8 Plus use the exact same home button part, which should make that particular replacement part a little easier to source. We successfully yanked 3 out of 4 adhesive tabs when removing the battery—leaving one stubbornly in place. Looks like Apple's decision to switch to four tabs from two was to avoid a sticky situation on that fancy new wireless charging coil.
  • Just a few turns from our Phillips and tri-point drivers and the display is free ... to hit the bench. For the full scoop on the display, check out our iPhone 8 Teardown.

  • Our parts testing crew reports that the 8 and 8 Plus use the exact same home button part, which should make that particular replacement part a little easier to source.

  • We successfully yanked 3 out of 4 adhesive tabs when removing the battery—leaving one stubbornly in place. Looks like Apple's decision to switch to four tabs from two was to avoid a sticky situation on that fancy new wireless charging coil.

  • Speeding right along, we pull out that factory-calibrated-for-AR dual camera unit.

  • These 12 MP cameras are solidly fixed together, enabling software used for portrait mode to combine images from both lenses.

随着一些十字螺丝和Y型螺丝的卸下,屏幕被拆解下来了,屏幕的完整拆解可以参考iPhone 8的拆解

我们的测试团队告诉我们8和8 Plus使用了相同的Home键,这应该会让更换部件的来源变得更广阔

我们拆解电池的时候成功地拉下了3条电池拉片,剩下了一条留在背板上,看样子苹果这样处理是为了防止漂亮的内部无线充电线圈被粘得黏糊糊的

加快进度,我们取出来这个出厂调教过的后置AR双摄模块

这个12MP的双摄组合被牢牢地固定在一起,而手机的软件能将两个摄像头的画面很好地处理组合在一起

在开源创作共享许可协议下,你的投稿已被许可