跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的33指南

英语
荷兰语

正翻译步骤 2

步骤 2
Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board. On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal. Carefully lift the I/O board and remove it from the lower case.
  • Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board.

  • On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal.

  • Carefully lift the I/O board and remove it from the lower case.

Verwijder de twee 3.1 mm lange T5 Torx-schroeven die het I/O-bord aan het logic board bevestigen.

Til het I/O-bord voorzichtig op en verwijder deze uit de onderste behuizing.

[* red] Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board.
+ [* orange] On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal.
[* black] Carefully lift the I/O board and remove it from the lower case.

在开源创作共享许可协议下,你的投稿已被许可