跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的19指南

英语
中文

正翻译步骤 4

步骤 4
Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket. Pry only under the hinged retaining flap, not the socket itself, or you may break it off the board. Use the flat end of a spudger to gently back the keyboard ribbon cable out of its socket by pushing first at one side, then the other.
  • Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

  • Pry only under the hinged retaining flap, not the socket itself, or you may break it off the board.

  • Use the flat end of a spudger to gently back the keyboard ribbon cable out of its socket by pushing first at one side, then the other.

使用撬棒扁平的一端掀起键盘带状电缆 ZIF 插座上的固定盖板。

只在铰链固定翻盖下方撬动,而不是从插座本身撬动,否则可能会将其从板上折断。

使用撬棒扁平的一端,先推一侧,然后推另一侧,轻轻地将键盘带状电缆从插座中拉出。

在开源创作共享许可协议下,你的投稿已被许可