跳转到主内容
英语
中文

正翻译步骤 10

步骤 10
Remove the single 8 mm brass Phillips screw securing the inverter to the logic board. Lift the inverter straight up off the pins on the logic board.
  • Remove the single 8 mm brass Phillips screw securing the inverter to the logic board.

  • Lift the inverter straight up off the pins on the logic board.

  • Be sure to lift the inverter straight up off the logic board, as the connector pins are very long and easily bent. If the pins bend during removal, use the connector on the inverter as a guide to bend them straight.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可