跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的22本指南

英语
中文

正翻译步骤 4

步骤 4
Disconnect the audio jack board ribbon cable by pulling it straight back out of the ZIF connector.
  • Disconnect the audio jack board ribbon cable by pulling it straight back out of the ZIF connector.

  • During reassembly, orient the ribbon cable so that the side with the white stripe faces you, as shown.

  • At this point it is possible to open the macbook all the way and to lay it flat on a table without causing any damage to the flex cables.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可