Skip to main content
英语
中文

正翻译步骤 4

Step 4
Look there!  Did someone bleed on that FPC connector for the LCD or is that adhesive?
Remove the LCD cable from the PCB
  • Look there! Did someone bleed on that FPC connector for the LCD or is that adhesive?

  • Starting at the connector, you can take the 1.0 flat head bit from the ifixit toolkit and carefully scrape the bits of that semi-hard adhesive off the ends of the connector lock. Then slip the spudger between the lock and connector body to release the cable and remove the LCD

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可