跳转到主内容
英语
中文

正翻译步骤 7

步骤 7
Put the assembly back into place (without screwing it in), and verify that the actuator pole hits the screws at a good location.
  • Put the assembly back into place (without screwing it in), and verify that the actuator pole hits the screws at a good location.

  • Adjust the length of screws if needed.

  • Put everything back together in reverse order, including all the screws you took out.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可