跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
I added an extra nut to the head of the screw so that there's a more substantial edge for the plastic can parts to press onto. Screw the screw through the hole you've just created. It should stick out approximately 1/2" from the side of the mechanical assembly. The 1/8" drill bit created a slight "interference fit" with the #8-32 screws, meaning that the plastic from the hole keeps the screw nice and tight.
  • I added an extra nut to the head of the screw so that there's a more substantial edge for the plastic can parts to press onto.

  • Screw the screw through the hole you've just created. It should stick out approximately 1/2" from the side of the mechanical assembly.

  • The 1/8" drill bit created a slight "interference fit" with the #8-32 screws, meaning that the plastic from the hole keeps the screw nice and tight.

  • Add a nut to the other side of the screw, just to hold it together.

  • Do not overtighten, as you want to keep a gap between the trap door and the side of the mechanical assembly.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可