跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Working from alternating sides of the board, use the flat end of a spudger to separate the optical drive connector board from the optical drive.
  • Working from alternating sides of the board, use the flat end of a spudger to separate the optical drive connector board from the optical drive.

  • The socket in the optical drive is particularly deep, so don't pry the connector up too far from one side to avoid shearing the connector off the board.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可