跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 7

步骤 7
Remove the front camera and sensor cable assembly. A piece of black double-sided insulating tape lies between the display and three rows of copper contacts on the back of the camera/sensor cable. It may remain stuck to the display, or it may come off with the cable. When reassembling, verify the tape is in place, or else cover the contacts on the back of the cable with an appropriate tape, such as Kapton tape.
  • Remove the front camera and sensor cable assembly.

  • A piece of black double-sided insulating tape lies between the display and three rows of copper contacts on the back of the camera/sensor cable. It may remain stuck to the display, or it may come off with the cable.

  • When reassembling, verify the tape is in place, or else cover the contacts on the back of the cable with an appropriate tape, such as Kapton tape.

卸下前置摄像头和传感器排线组件。

在屏幕和摄像头/传感器排线背面上三排铜触点的中间有一块黑色的双面绝缘垫片。有可能残留在屏幕上,也有可能跟随排线一同脱落。

重新组装的过程中,检查该垫片是否在正确位置,否则使用如聚酰亚胺胶带来将其粘贴到排线背面的触点上。

在开源创作共享许可协议下,你的投稿已被许可