菜单

你的设置

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 4

步骤 4
Insert the sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera. If necessary, use an iOpener or hair dryer to heat the top portion of the display and soften the adhesive securing the flex cable. Pry up to separate the edge of the flex cable from the back of the display.

  • Insert the sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera.

  • If necessary, use an iOpener or hair dryer to heat the top portion of the display and soften the adhesive securing the flex cable.

  • Pry up to separate the edge of the flex cable from the back of the display.

将 iFixit 拆机工具尖的一头插到前置摄像头的背面、摄像头总成的排线下

如果需要的话，使用 iOpener 或电吹风加热显示屏上部，使固定排线的粘合胶软化

撬起，使排线和显示屏背部分离

在开源创作共享许可协议下，你的投稿已被许可。